Installation manual

Manual Part # 800-1402-001 Rev E Page 47 of 48
SECTION 6 ACCESSORIES
ProRF SPC
ProRF allows linear measurement or position data to be
transmitted wirelessly to a PC or other device having a USB
or RS232 connection. The system uses 802.15.4 radio
modules to provide reliable two way communication. The
transmitter plugs into any Digital Readout with an SPC
output.
ProRF Encoder
Instead of a long cable between the Encoder and the
Readout, a Transmitter at the Encoder sends data to a
Receiver connected to the Readout at a remote location, or
to a PC Receiver with RS232 or USB output.
ProMUX
ProMUX-3 is an easy to use hardware interface that
provides communication from M150 & 250 readheads (or
SPC equipped readouts) to a user’s PC or PLC. ProMUX-3
supports three inputs, and one RS232.
Analog Interface Unit
The AIU is an interface designed to provide an analog
signal output proportional to the displayed position of a
ProScale measurement system.
SPC Converter
GageWay SM ™ converts SPC output from many of our
digital readouts to serial or USB data.