User manual

ProScale RF Receiver User Manual Page 13 of 17
Echo Mode
To display the current echo mode (from default), type in:
e<ENTER>
The receiver responds with:
Echo mode on
To change the echo mode to off, type:
E0<ENTER> Use 0 (zero) for off and 1 for on
The receiver responds with:
Echo mode off
Record Start Marker
To display the current record start marker status (from default), type in:
m<ENTER>
The receiver responds with:
Marker mode off
To change the record start marker mode to on, type:
M1<ENTER> Use 0 (zero) for off and 1 for on
The receiver responds with:
Marker mode on
Terminator Type
To display the current terminator type (from default), type in:
t<ENTER>
The receiver responds with:
Terminator = <CR/LF> (0)
To change the terminator mode to CR only (1), type:
T1<ENTER> Use 0 (zero) for CR/LF and 1 for CR only
The receiver responds with:
Terminator now = <CR> (1)