User`s manual

Accurate Technology ProScale Page 12 of 48
Surface Mount LCD Displays
The Surface Mount LCD Displays are an ideal choice for applications where
flexibility and easy installation are important. They can be installed with
something as simple as Velcro™ or double sided tape, or by using the screw
locations inside of the back case or on the outside of the back case. Several
versions of this Display are available as described below.
Basic Display
This Display operates on 2 AA batteries. It is ideal
for machinery applications where more advanced
programming features are not desired or required.
This Display has most of the programming features
of the General Purpose Display but has no data or
signal output capability, or special function keys.
Part Number: 700-1600-220
General Purpose, Battery
This Display operates on 2 AA batteries. It includes
all the features of the BASIC Display plus it has an
auxiliary keypad with 6 keys for switching between
ABSolute and INCremental measurements,
MONitoring position drift, SENDing SPC data,
HOLDing the reading, and F1/F2 special functions.
Part Number: 700-1600-200
General Purpose, 24VDC
This Display operates on 24VDC. It includes all
the features of the GENERAL PURPOSE, BATTERY
Display. It comes with a connector that allows
easy connections for supply voltage and output
connections for the Limit Alarm / Monitor Output
signal. This Display also has LCD Backlighting.
For use with ProScaleABS systems ONLY.
Part Number: 700-1600-205
General Purpose, Wireless
This Display operates on 2 AA 3.6V Lithium Ion
batteries. It includes all the features of the
GENERAL PURPOSE, BATTERY Display. It has a
built in RF transmitter that allows data to be sent
wirelessly to a ProScale-RF receiver (Part # 700-
1036-xxx) which has an RS232 output.
(See Section 4: JUMPERS for important battery
configuration information)
Part Number: 700-1600-250