User`s manual

ProScale M150, M250 with LCD Digital Displays Page 19 of 48
ProScale Model 250
ProScale Model 250 is a general purpose measuring system with seven
standard measuring ranges from 0-300mm (12in.) up to 0-6m (20ft.).
Model 250 systems use Absolute (ABS) style Scales, Absolute (ABS) style
ReadHeads, and any of several available Displays. This manual covers the
operation of the General Purpose LCD Displays with Firmware (F/W) version
2.1 or higher.
Multiple ReadHeads connected to individual Displays or data acquisition
units may be used on the same Scale simultaneously.
Scale & ReadHead Installation
ProScale Model 250 is easy to install. By following the basics of good
installation, reliable, error-free operation is assured. ProScale Model 250 can
be used in many different measurement applications, and with numerous
types and brands of equipment. Therefore all installations will be a little
different and it is the responsibility of the user to choose the bolts, screws, or
other mounting hardware that guarantee proper installation for optimum
operation.
Note: If a custom kit was ordered which contains instructions for installing
this ProScale on a specific product, follow those instructions rather
than the installation and calibration instructions in this manual.
ProScale Model
250
shown with
Panel
M
ount General Purpose LCD Display