User`s manual

Accurate Technology ProScale Page 46 of 48
SECTION 6 ACCESSORIES
RS232 Adapter:
This cable/adapter will convert the SPC output of the
ProScale Display to an RS232 signal for input to a
PC.
1 INPUT; 1 RS232 OUTPUT
ProMUX 3
A hardware interface device providing
communication and control of one to three ProScale
Displays or Readheads from a PC or PLC.
1, 2 or 3 INPUTS; 1 RS232 OUTPUT
ProMUX-8
A multiplexer designed for OEM and system
integrators for use in acquiring positional information
(non-CNC). It communicates with a PC or PLC via
RS232 or RS-422.
Up to 128 INPUTS (15 ProMUX-8 can be connected
to the same RS-422 bus), 1 RS-422 OUTPUT.
Pro-RF™
A 2 way system consisting of a base module and a
remote module that communicate over a bi-
directional RF interface.
Pro-RF can support up to 32 remote modules up to
300 feet from the base. (RS-232 Output)
ProScaleRF Receiver
A 1 way system consisting of a base module and a
ProScale RF Display.
ProScale-RF can support up to 63 remote Displays
up to 100 feet from the receiver. (RS-232 Output)
Analog Interface Unit (AIU)
The AIU is designed to provide an analog signal
output that is proportional to the current position
being displayed on a ProScale linear measurement
system.
The AIU provides a DC signal range from 0 to 5 volts
or 0 to 10 volts.