PURCHASED FROM ADDRESS Accurist Helpline 020 7447 3945 Further information or instructions can be obtained from the Accurist Helpline during office hours Monday to Friday.
Contents How to use these instructions CR60 Operating Instructions CPOO Operating Instructions Care of your watch Bracelet Adjustment International Service Agents Resistance to water Accurist Quartz Guarantee After Sales Service Payment & Postage Instructions 3 5 17 29 33 35 39 42 44 45
Caseback markings w MB 119 CAL 0T10 SR927W Accurist Watches Logo Model Number Calibre Number Battery Number
How to use these instructions This booklet contains setting instructions for the Accurist Multi Function Chronograph with duo display series of watches. Each section describes a particular calibre (also called watch movement) which offers a unique set of functions and features. As such, it is necessary to identify the correct calibre of your watch before proceeding to the appropriate section (see diagram opposite).
CR60 Operating Instructions Top Left (TL) Digital display Mode Display Position A Position B Bottom Left (BL) Bottom Right (BR) Digital Display
Displaying the time and calendar of cities worldwide: 1. Press TL Button to select the ‘TME’ or ‘CAL’ mode. 2. Press BL Button to select city’s names and its time and calendar. Analogue time setting: 1. When second hand moves to the 0 position, pull the crown to position B. 2. Turn crown either way to correct time. 3. Push in crown to position A.
CR60 Operating Instructions continued... Digital time setting 1. Press TL Button to select Time (TME) mode. 2. Press BL Button to display the city whose time you want to adjust. 3. Press and hold BL Button for 2 or more seconds to select summertime (S.T) either ‘ON’ or ‘OFF’. 4. Press BR Button to select summertime ‘ON’ or ‘OFF’ 5. Press BL Button to select between summertime, seconds, minutes, hour and 12/24 hour sequence. 6. Press BR Button to adjust the flashing figures.
Note: When in the 12-hour mode, be sure to select morning (A) and afternoon (P) The set flashing mode (step 6) will automatically revert to the normal display if left for two minutes with no input. To set the calendar/date: Adjusting the calendar for one of the 30 cities and UTC time will automatically adjust the calendar for the remaining cities. 1. Press TL Button to select Calendar (CAL) mode. 2. Press BL Button to display the city whose calendar you want to adjust. 3.
CR60 Operating Instructions continued... To set the calendar/date continued . . . 5. Press the BL Button to select the ‘month’, ‘day’ and ‘year’ sequence. 6. Press the BR Button to adjust the flashing figures. Press and hold BR Button to quick change the flashing figures. 7. Press TL Button to return to normal time display. Press and hold BR Button for 2 or more second to switch between city display (e.g. LON) and day display (e.g. SAT).
To set the alarms: Setting the operation of Alarm 1 and Alarm 2 are the same, only the sound of the alarms is different. Once you turn the alarm on, it will sound for 20 seconds at the same time each day. 1. Press TL Button to select the or mode. 2. Press BL Button to select the city for alarm setting. 3. Press and hold BL Button for 2 or more seconds, the ‘hour’ display will start flashing. The flashing ‘hour’ display can be adjusted by pressing the BR Button.
CR60 Operating Instructions continued... To set the alarms continued . . . Notes: Press the BR Button while in the alarm mode (AL1 or AL2) to switch alarm either ‘ON’ or ‘OFF’. To test the alarm sound, while in the alarm mode (AL1 or AL2). Press and hold BR Button. (Alarm sound monitor function) When in the 12-hour mode, be sure to select morning (A) and afternoon (P).
Chronograph measurement: 1. Press BL Button to select Chronograph mode (CHR). 2. Each time the BR Button is pressed, the chronograph is switched between ‘start’ and ‘stop’. 3. Press the BL Button to reset while the chronograph is stopped. Chronograph split time measurement: 1. Press BL Button to select Chronograph mode (CHR). 2. Press BR Button to start chronograph. 3. Press BL Button to display the split time for approximately ten seconds.
CR60 Operating Instructions continued... Chronograph split time measurement continued . . . Note: Even if the TL Button is pressed and the mode is switched while the chronograph is measuring, the measurement will continue. When you return to the mode the measured time is again displayed. Using the timer : You can set the time for a number of whole minutes up to 99 in one minute decrements.
Using the timer continued . . . 1. Press TL Button to select Timer mode (TMR). 2. Press BL Button to adjust timer in one minute decrements. (Press and hold BR Button to quick change the flashing figures) 3. Press BR Button to start and stop the timer. 4. Press BL Button to revert to set timer mode, when the timer has stopped. Note: If the BL Button is pressed while the timer is running, the time will reset to the set timer mode and commence timing automatically.
CR60 Operating Instructions continued... Using the zone setting : In the zone setting mode you can select the cities that you want to display from among the 30 cities and UTC time that this watch is capable of displaying, also you can set summertime for each of these cities. This allows you to easily recall and display only the cities that have been set (to ON) in any mode. 1. Press TL Button to select Set mode (SET) 2. Press BL Button to recall the city that you want to set. 3.
Using the zone setting continued . . . 5. Press BL Button to display the Summertime (S.T) setting for selected city. 6. Press BR Button to select either summertime on (‘ON’ S.T) or summertime off (‘OFF’ S.T). 7. Press BL Button to select and set modes for other cities. Please follow procedures 3 to 6 for set up. 8. When all desired cites have been set, press TL Button to return to normal zone setting display. All Reset: 1. Gently pull out crown to Position B. 2.
KEY TO DIAGRAM UTC dial - shows universal coordinated time (UTC) in 24 hour format. UTC (or GMT) is the standard from which all time zones are calculated. 24 hour dial - shows main hand time in 24 hour UTC Dial format. This can be used to determine the correct Top Left (TL) Top Right (TR) a.m. and p.m settings. Mode indicator dial - shows main hand time in 24 hour format. This can be used to determine the correct a.m and p.m. settings.
To set the time: 1. Push the bottom right hand button until the mode hand indicator points to TME. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position. 3. Select the time zone on the digital display by pressing the upper right button or the lower left button. 4. Pull the bottom right button out one click. The bottom part of the digital display will start flashing. Press the bottom left button to adjust for daylight saving time. 5.
CPOO Operating Instructions continued . . . To set the time continued . . . 6. Press the upper right button. You will see the minutes flashing. Press the lower left button to set the minutes to your current time. 7. Press the upper right button. You will see the hours flashing. Press the lower left button to set the hours to your current time. 8. Press the upper right button. You will see 12H or 24H flashing. Press the lower left button to switch between 12 hour and 24 hour. 9.
To set the calendar: 1. Push the bottom right hand button until the mode hand indicator points to CAL. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position. 3. Select the time zone on the digital display by pressing the upper right button or the lower left button. 4. Pull the bottom right button out one click. You will see the month flashing on the digital display. Press the lower left button to change the month. 5.
CPOO Operating Instructions continued . . . To set the alarms 1. Push the bottom right hand button until the mode hand indicator points to AL1, AL2 or AL3. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position. 3. Select the time zone on the digital display by pressing the upper right button or the lower left button. 4. Pull the lower right button out one click. You will see ON or OF flashing on the digital display.
Using the timer 1. Press the lower right button to move the mode hand indicator to TMR mode on the mode dial. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position. 3. Pull the lower right button out one click. You will see the minutes flashing in the digital display. Change the minutes by pressing the lower left button. Once you have set the minutes on the timer, push the lower right button back in one click. 4.
CPOO Operating Instructions continued . . . To set the timezone 1. Setting the time zones allows you to add or remove cities on the digital display or switch between daylight saving and standard time. Begin by pressing the lower right button to move the mode hand indicator to SET mode on the bottom dial. 2. If the hour or minute hands are obscuring the digital display, press and hold the upper left button for three seconds. This will cause the hour and minute hand to retract to the 12 O’clock position.
Troubleshooting The analogue hands block the digital display. 1. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position allowing a clear view of the digital display. 2. Press the upper left button to return the analogue hands to the previous position. The analogue time does not match the digital time for the selected zone. 1. Push the bottom right hand button until the mode indicator hand points to TME. 2.
CPOO Operating Instructions continued . . . Troubleshooting continued . . . The analogue hands are not precisely synchronised with the digital time. 1. Press the lower right button to move the mode indicator hand to CHR. 2. Pull the lower right button out one click. The hour, minute and UTC hands will retract towards the straight up 12 O’clock position. You will see UTC on the top half of the digital display. 3. Press the upper right button to advance the hands to the straight up 24-hour position.
4. Press the upper left button. You will see HR on the top half of the digital display. Press the upper right button to advance the hour and 24-hour hand clockwise until they both point straight up at the 24-hour position. Use the lower left button to move the hand anti-clockwise.anti-clockwise until it is pointing straight up at the 12 O’clock position. 5. Press the upper left button. You will see MIN on the top half of the digital display.
CPOO Operating Instructions continued . . . Troubleshooting continued . . . The watch malfunctions in some way and the above procedures do not work. 1. Press the lower right button until the mode indicator hand points to TME. 2. Pull the lower right button out one click. Press the other three buttons down simultaneously for three seconds and release. You will see 8’s on the digital display. 3. Press the upper left button. You will see UTC on the top half of the digital display.
5. Press the upper left button. You will see MIN on the top half of the digital display. Press the upper right button to advance the minute hand clockwise or the lower left button to move anti-clockwise until it is pointing straight up at the 12 O’clock position. 6. Push the lower right button back in one click. If you require technical assistance: The following resources are available if you require technical assistance – 1. CDROM giving step-by-step interactive instructions is supplied with the watch.
Care of your watch Avoid temperature extremes 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely cold places; this may cause your watch to gain or lose time. Should it begin to gain or lose time, place your watch on your wrist to restore its original accuracy. Avoid wet conditions 1.
Avoid strong shocks 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting severe shock to it. Avoid strong magnetic fields 1. Keep your watch away from strong magnets 2. Generally, your watch is not affected by magnetic fields from household appliances such as television sets and stereo equipment.
Avoid harmful chemicals, solvents & gases 1. Avoid wearing your watch in the presence of strong chemicals, solvents or gases. 2. Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint. Periodic inspection 1. A regular 4 to 5 years service by an authorised Accurist technician will ensure trouble free operation. 2. Refer to the After Sales Service section on page 44 for details.
IMPORTANT 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately. 2. Do not attempt to replace the battery yourself as this invalidates your guarantee. Keep your watch clean Wipe off any moisture that adheres to the case, glass or band with a soft, clean cloth.
Bracelet Adjustment The bracelet requires a small adjustment and the model has a Z-type clasp. 1. Depress the end of the spring bar on the centre clasp with a pin. 2. Relocate the spring bar in an alternative hole.
The bracelet requires a significant adjustment or the model does not have a Z-type clasp. 1. Use the enclosed wrist gauge to measure and mark the size of your wrist. 2. Return the completed wrist gauge with your watch 3. Follow the instructions in the After Sales Service section to return your watch for adjustment. Your watch will be adjusted free of charge.
International Service Agents International Service Headquarters Accurist Watches Limited, Asher House, Blackburn Road, West Hampstead, London, NW6 1AW Tel: +44 (0)20 7447 3945, Fax: +44 (0)20 7447 3946 United Arab Emirates Al Abbas, P.O.
Netherlands Sabre Nederland B.V.
International Service Agents continued . . . Kingdom of Saudi Arabia Al Asasyah, Sitteen Street, P.O. Box 19248 - 19249, Jeddah 21435 Tel: 00966 672 6826, Fax: 00966 676 2262 N. Antilles J Best Jeweler, 2 Front Street, Philipsburg, St. Maarten, N.
Cyprus A Chrysanthou Ltd, 35 Kappadokias Street, Strovolos 2028 Tel: 00357 22 512 122, Fax: 00357 22 512 880
Resistance to water INDICATIONS ON DIAL OR CASEBACK DIAL CASEBACK LIGHT SPRAY, PERSPIRATION, LIGHT RAIN BATHING, ETC... SWIMMING ETC...
SKIN DIVING: DIVING WITHOUT AN AIR TANK SCUBA DIVING: DIVING WITH AN AIR TANK DIVING: WHEN USING A HELIUM ENRICHED ENVIRONMENT X X X X X X OK X X OK OK X
Resistance to water continued . . . IMPORTANT - NEVER PULL OUT THE CROWN WHEN THE WATCH IS WET. • Tighten screwlock crown completely • Water resistance is not a permenant property. We strongly recommend you return your watch for resealing every 4 - 5 years and/or when changing batteries • “Water resistant” may sometimes be abbreviated as “Water resist” or “WR”. • Never pull out the crown when the watch is wet. • Always set the crown in the normal position.
Accurist Quartz Guarantee The terms of this guarantee provide rights that are in addition to your statutory rights and do not in any way limit or otherwise affect those statutory rights. Your Accurist watch is guaranteed for 3 years from the date of original retail purchase against any malfunction of the watch movement due to defective materials or workmanship. This guarantee is applicable only to watches purchased in the United Kingdom.
Accurist Quartz Guarantee continued . . . When returning your watch, please indicate brief details of the nature of the problem and the repair required. We will, at our option, repair or replace your watch with a model of similar appearance or value. After the expiry of this guarantee the Accurist Service Centre and International Service Agents are at your complete disposal. We will be pleased to quote for routine maintenance, oiling or repair of your watch by our factory trained staff of experts.
After Sales Service Each Accurist watch comes with a lifetime commitment to quality after sales service. Our award winning customer service team are dedicated to providing expert servicing from bracelet adjustments to full overhaul. We pride ourselves in identifying our customer's requirements and reacting to their individual needs. An expert watchmaker personally services each watch and Accurist guarantees quality at every step of the process.
For UK and Eire 1. Complete the payment details form attached opposite. 2. Return the watch and payment details form together with this guarantee to the Accurist Service Centre address listed on page 35. 3. Enclose a cheque, postal order or MasterCard/Visa payment for £5.00 payable to Accurist Service Centre. This covers return postage and insurance for loss or damage whilst in transit or undergoing repairs. No liability for loss or damage will be accepted without this remittance. 4.
1 I enclose: Accurist Watches Limited Asher House Blackburn Road West Hampstead London, NW6 1AW postal order debit card (issue no. 1. Return the watch with payment to your nearest International service agent (listed on page 35). 2. Enclose a cheque for €7.50. This covers return postage and insurance for loss or damage whilst in transit or undergoing repairs. No liability for loss or damage will be accepted without this remittance.