Operating instructions

CPOO Operating Instructions continued . . .
To set the timezone
1. Setting the time zones allows you to add or remove cities on the digital
display or switch between daylight saving and standard time. Begin by pressing
the lower right button to move the mode hand indicator to SET mode on the
bottom dial.
2. If the hour or minute hands are obscuring the digital display, press and hold
the upper left button for three seconds. This will cause the hour and minute
hand to retract to the 12 O’clock position.
3. Now pull the lower right button out one click. You will see the digital display
flashing. Press the upper left button to select SET to display the city or OFF to
not display the city. Press the lower left button to turn summer time on or off.
Summer time is indicated on the lower part of the digital display. Daylight
savings time must be manually set for each city.
4. Pressing the upper right button will allow you to scroll through all the cities.
After setting, push the lower right button back in.
23