Instruction Guide

2 eye and 3 eye chronograph
with date
Resetting the chronograph function:
• Before setting the time please check that all
chronograph hands are at the “0”/12 o’clock
position.
• To reset the hands to the “0”/12 o’clock
position press the buttons on your watch in the
following sequence:
1. If the chronograph is counting then press ‘A’
to stop the chronograph and then ‘B’ to reset
back to “0”.
2. If split timing is displayed then press ‘B’ then ‘A’
followed by ‘B’ again to reset.
• Always push the crown back to position “1”
once the above has been completed.
* Instructions continued overleaf.