User Manual

Accusys 7630

Fixed connector drive carrier

The ACS-7630 should be fitted with three hard disk drives (HDDs). Load each drive into a

drive carrier as follows:

1. Unlock the drive carrier and slide it out of

the controller box.

2. Place the disk drive in the drive carrier, so

that the power and IDE connectors are

lined up with the connectors inside the

carrier.

3. Connect the power connector to the disk

drive first, then carefully push the disk

drive so that the drive’s IDE connector is

seated securely into the IDE connectors in

the disk carrier.

4. Push the power connector into the drive

connected to ensure it is firmly secured.

5. Secure the disk drive by screwing it to the

drive carrier case.

6. Slide the loaded disk drive carrier into the

ACS-7630 Controller Box and lock it.

The disk carrier connector at the back of each controller box disk carrier slot

can be damaged if the disk carrier is not properly aligned when inserted.

Insert the disk carrier gently to avoid damage.