Manual

ManualsBrandsAccusys ManualsStorageAcuta

Accusys Acuta User’s Manual

1. The USB port cannot be used at the same time as either of the IEEE 1394

port.

2. 2 of IEEE 1394 port are for daisy chain to connect another IEEE1394

device,not for connecting ACUTA 4/4S to 2 host at mean time for access.

To connect to the host:

1. Power on ACUTA 4/4S and follow the

instructions earlier in this chapter to

establish a RAID array.

2. Either:

Ö Connect one end of the supplied

USB cable to the USB port and the

other end to a spare USB port on

your host computer, or,

Ö Connect one end of one of the

supplied IEEE 1394 cables to one of

the IEEE 1394 ports.

Advanced users wishing to remotely monitor the status of their array should

connect ACUTA 4/4S via an RS-232 cable to a terminal or computer hosting a

terminal emulation program.

3. The host computer should detect the presence of the ACUTA 4/4S subsystem. Turn to the

next chapter for instructions on formatting your array.

Serial ATA host interface version

Serial ATA allows transmission up to 1.5 Gbps. Serial ATA is compatible with the following host

operating systems:

Operating System SATA

Windows NT4.0

●

Windows 2000

●

Windows XP

●

Windows 2003

●

Linux Red Hat 7.3

Linux Red Hat 9.0

●

MAC OS 9

MAC OS X

Fedora (core 1)

●

Fedora (core 2)

●

Fedora (core 3)

●

格式化: 非醒目提示

註解 [V16]: replaced the

photo

刪除: release

註解 [V17]: per MPR050305,

remove Win 98/ME supported,

and add Fedora 2 & 3 OS

supported

刪除: release