Instruction Manual

11
JBOD System Quick Start Guide
Using the Rail Extenders
Follow the procedures below to install the rail extenders:
1.Install the rail extenders and attach the screws to secure them.
2.Slide the RAID system into the rack and secure it into place using the
fixing screws.
Rack-Mount Instruction
To mount the “A12R/U-SJ, A16R/U-SJ and A24R/U-SJ” in any standard-sized rack,
follow these instructions:
1. Place the “A12R/U-SJ, A16R/U-SJ and A24R/U-SJ” on a hard flat
surface with the front panel facing you.
2. Attach a rack–mount bracket to one side of the “A12R/U-SJ,
A16R/U-SJ and A24R/U-SJ” with the supplied screws. Then attach the
other bracket to the other side.
3. Make sure the brackets are properly attached to the “A12R/U-SJ,
A16R/U-SJ and A24R/U-SJ”.
P
o
w
e
r
IO
#
2
A
C
T
I
O
#
1
A
C
T
IO
#
2
R
D
Y
I
O
#
1
R
D
Y
H
D
D
T
e
m
p
F
a
n