Instruction Manual

JBOD System Quick Start Guide

2.Plug the second power cable into the other AC power port.

3.Once all the components have been connected, the system can now

be powered on using the power switch.

Power on the system in the following order:

• JBOD system(s)

• RAID system

• Host server

Note

Before turning the system on, make sure the chassis ID switch has

been set properly.

When the JBOD system is successfully installed and powered on,

Power, Fan, TEMP, and HDD will turn green and IO1 and IO2 RDY

LEDs will flash green.