Manual

System Connections
26
2. Connect the other end to the CH1 port of the JBOD system.
3.5 Connecting and Turning On the Power
Once all of the components have been installed into the RAID system,
and the management interfaces have been connected, the RAID system
can now be powered on.
1. Plug one power cable into the AC power port.
Note
The illustration above shows A16R-FS RAID system. The same
procudures apply for A12R-FS&SS, A16R-SS and A24R-FS&SS.
1
Contraller A
P/S 1
A12R/U
A16R/U
A24R/U