Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

Step 3. System Connections and Management

Connecting to the Host

Connecting Fiber RAID System Controller to the Host

A12R/U-FS, A16R/U-FS, and A24R/U-FS have dual 4G fiber channel

interfaces on each controller. Each channel interface can be

connected using an optical or copper transceivers and cables.

To connect an optical cable, simply insert the cable to the CH1 port.

You can configure your RAID system for:

• Storage Area Network (SAN)

• Direct Attached Storage (DAS)

• JBOD Expansion using a SAS data connection

To connect an LC optical SFP transceiver, follow the procedures below:

1. Insert the SFP transceiver into the CH1 port.

2. Then connect the optical cable to the SFP transceiver.

3. Connect the other end of the optical cable to the HBA connector of

the host server.

Before using Optical fiber for transfer data, Make sure had connected with

approved Optical Transceiver Module.