Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

Connecting SAS RAID System Controller to the Host (SAS HBA Card

required)

1. Insert the SAS cable into the CH1 port.

2. Insert the other end to the HBA connector of the host server.

Connecting the CLI Management Port

The RAID system can be managed using the CLI.

To connect the CLI port, follow the procedures below:

1. Insert the RS-232 cable into the COM port.

Note

The illustration above shows A16R-SS. Same procedures apply to

A12R/U-FS&SS, A16R/U-FS, and A24R/U-FS&SS.

A16R-FS COM port connection