Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

Step 4. Setting Up LAN Connections

LAN communication enables the Command Line Interface (CLI) and

Graphic User Interface (GUI) on your PC to monitor and control the RAID

system to easily monitor and configure the RAID system.

A LAN/WAN connection is required. Follow the procedures below:

To set up a LAN cable connection:

1. Attach one end of the ethernet cable to the LAN port on one of the

Controller board.

2. Attach the other end of the ethernet cable to a LAN switch or directly

to a LAN port on the Host PC or Server using a crossover cable.