Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

2. Plug the second power cable into the other AC power port.

3. Turn on the power switch.

Power off:

Before you power off the system, make sure all the running process are

completed on the host computer.

Please follow the following procedure to shut down your system properly.

By LCD

1. Log in from the LCD panel by inputting the password. The default

password is “0000”. See Set up through LCD on page 19 for instructions

on using the LCD panel.

2. Select System Setup > Shutdown > Yes to power off the system.

By GUI

1. Open a browser and enter the RAID system’s IP address in the address

field. (The default IP address is 192.168.0.1)

2. Log in from GUI to open the Config Mode. The default username and

password are “admin” and “0000”.

3. Click System Management > Restart/Halt to open the Restart/Halt

page.

4. Select Both Controllers from the Controller ID drop down menu and

select Halt from the Action drop down menu and click Apply.

5. Click Confirm to confirm and shut down the system.

6. Turn the power off when the LCD displays “Ready to power off!”.