Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

8. Highlight the disks to be grouped in Members and Spares and click

to move them to the Member Disks.

9. Click Apply to create the disk group.

10. Repeat steps 4 to 9 to create other disk groups.

By CLI

Disk Groups can also be created from CLI.

1. At the CLI prompt type in: hddlist all to check the status of the hard

disk and make sure they are unused.

2. Use the following command to create Disk Groups.

For example:

CLI>dgcreate dg0 hdd1 hdd2 hdd3 hdd4 hdd5 hdd6 hdd7 hdd8

CLI>dgcreate dg1 hdd9 hdd10 hdd11 hdd12 hdd13 hdd14 hdd15

hdd16

Command dgcreate

Synopsis dgcreate dgi hddx hddy ... [-n name] [-i par/seq] [-z]

[-s hddz,hdda, ...] [-t capacity]

Description Create a disk group with member disks

Parameters [-n name]: the name of a disk group

[-i par/seq]: logical disk initialization mode (parallel or

sequential)

[-z]: write-zero immediately

[-s hddz,hdda, ...]: local spare disks

[-t capacity]: capacity to truncate