Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS
34
7. Click Host ID and select a Host ID from the drop-down menu. A
maximum of 32 hosts can be added to the controller.
8. Choose each WWPN of Fiber HBA from the ‘Choose from detected
hosts’ box or directly enter the WWPN in this field. Each FC port needs
a WWPN for communicating with other devices in an FC domain.
9. Enter the SAS address. SAS Address is needed for communicating with
other devices in an SAS domain.
10. Enter the Host name. Use the system default name as hostx. ‘x’ is the
Host identifier. OR Uncheck the ‘Use system default name’ box and
enter the name in the Name field. The maximum name length is 63
bytes.
11. Select a Host Group ID (HG ID) from the drop-down menu. You can
select from hg0 to hg31 or No group. This setting is required for
symmetric method.
For example:
12. Repeat steps 6 to 11 to create more hosts.