Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS
36
B. Create Disk Groups
By GUI
1. Click Disk Groups from the Config Mode menu. The following screen
appears.
2. Click Create to open Create Disk Group screen.
3. Select a DG ID from the drop-down menu.
4. Use the system default name as dgx. ‘x’ is the DG identifier. Or
Uncheck the ‘Use system default name’ box and enter the name in
the Name field. The maximum name length is 63 bytes.
5. Highlight the disks to be grouped in Members and Spares and click
to move them to the Member Disks.
6. Click Apply to create the disk group.
7. Repeat steps 2 to 6 to create other disk groups.