Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

By CLI

Disk Groups can also be created from CLI.

1. At the CLI prompt type in: hddlist all to check the status of the hard

disk and make sure they are unused.

2. Use the following command to create Disk Groups.

For example:

CLI>dgcreate dg0 hdd1 hdd2 hdd3 hdd4 hdd5 hdd6 hdd7 hdd8

CLI>dgcreate dg1 hdd9 hdd10 hdd11 hdd12 hdd13 hdd14 hdd15

hdd16

C. Create Logical Disks

By GUI

1. Click Logical Disks from the Config Mode menu. The following screen

appears.

Command dgcreate

Synopsis dgcreate dgi hddx hddy ... [-n name] [-i par/seq] [-z]

[-s hddz,hdda, ...] [-t capacity]

Description Create a disk group with member disks

Parameters [-n name]: the name of a disk group

[-i par/seq]: logical disk initialization mode (parallel or

sequential)

[-z]: write-zero immediately

[-s hddz,hdda, ...]: local spare disks

[-t capacity]: capacity to truncate