Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS
39
For example:
By CLI
1. At the CLI prompt type in: hddlist all to check the status of the hard
disk.
2. Use the following command to create logical disk.
For example:
CLI>ldcreate dg0ld0 1000gb raid5 -s 128kb -i bkg -c ctla
CLI>ldcreate dg0ld1 1000gb raid5 -s 128kb -i bkg -c ctlb
CLI>ldcreate dg1ld0 1000gb raid5 -s 128kb -i bkg -c ctla
CLI>ldcreate dg0ld1 1000gb raid5 -s 128kb -i bkg -c ctlb
Command ldcreate
Synopsis ldcreate dgxldy capacity raidlevel [-s stripesize]
[-i initopt][-f x] [-o offset] [-n name] [-c ctlx]
Description Create a logical disk
Parameters capacity: logical disk capacity
raidlevel: raid0, raid5, raid3, raid1, raid6, raid10, or
nraid
[-s stripesize]: stripe size
[-i initopt]: initialization method
[-f x]: free chunk
[-o sector]: alignment offset
[-n name]: the name of a logical disk
[-c ctlx] (for redundant controller only): the preferred
controller of a logical disk