Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

8. Click RAID Management to see if the Mapping is correct.

By CLI

1. Use the following command to add a LUN ID to a virtual disk.

For example:

CLI>hgaddlun hg0 dg0ld0

CLI>hgaddlun hg0 dg0ld1

CLI>hgaddlun hg1 dg1ld0

CLI>hgaddlun hg1 dg0ld1

2. Type htplistlun all to see if the Mapping is correct.

Command hgaddlun

Synopsis hgaddlun hgx jbdy/dgyldz/voly/vvoly [-l lunz] [-s

512b/1kb/2kb/4kb] [-g cylinder head sector] [-w wt/

wb]

Description Add a LUN in a host group with a virtual disk

Parameters Refer to sgaddlun for all parameters