Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

To Install PathGuard and MPIO Driver:

1. To install the PathGuard and MPIO Driver, double click the installation

file on a host computer (choose the 32-bit or 64-bit installation file

according to your host system).

2. Follow the on-screen instructions to start the installation. PathGuard

and the MPIO Driver will be installed automatically.

3. Reboot the host computer, and you have completed the installation.

Check the MPIO disk status on the host computer

After the PathGuard and the MPIO Driver has been installed, you can

find the new multi-path disk device(s) and the Multi-Path Support

displayed in the following screen: Computer Management > Device

Manager. (Right-click the My Computer icon on the desktop > select

Manage)