Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS

Beeper

When the Beeper Control is set to On, the system will turn on the beeper

alarm if one of the following occurs. If the user mutes the beeper via CLI,

LCD, or GUI, the system temporarily mutes the beeper until a new failure

or error occurs.

• Voltage failure or error.

• Power supply failure or error.

• Fan failure or error.

• Temperature failure or error.

• BBM failure or error (when BBM is connected).

• Disk SMART warning.

• Disk bad block over threshold warning.

• Disk group with degraded logical disk and no disk for rebuilding.

• Disk group with faulty logical disks.

• UPS failure or error.

• Controller failure or removed.

• Dual controllers fail to boot up because of configuration conflict.

• Controller failback cannot proceed.