Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS
4
SATA hard disks
SATA hard drive installation requires an AA-MUX adapter to be installed
on the hard disk tray first before installing the SATA hard disk.
Follow the procedures below to install SATA hard disks:
1. Place the AA-MUX adapter on the hard disk tray and attach the four
screws as shown.
2. Place the hard disk into the hard disk tray with the drive connectors
facing the AA-MUX adapter.
Note
AA-MUX is an optional accessory and is sold separately. Contact your
supplier to purchase one.