Owner's manual

Accusys A12R/U-FS&SS / A16R/U-FS&SS / A24R/U-FS&SS
7
Installing the Rail Extenders
Follow the procedures below to install the rail extenders:
1. Install the rail extenders and attach the
screws to secure them.
2. Slide the RAID system into the rack and
secure it into place using the fixing
screws.Rack-Mount Instructio.
Rack-Mount Instruction
To mount the “A12R/U-FS & SS, A16R/U-FS & SS and A24R/U-FS & SS” in
any standard-sized rack, follow these instructions.
1. Place the “A12R/U-FS & SS, A16R/U-FS & SS and A24R/U-FS & SS” on a
hard flat surface with the front panel facing you.
2. Attach a rack–mount bracket to one side of the “A12R/U-FS & SS,
A16R/U-FS & SS and A24R/U-FS & SS” with the supplied screws. Then attach
the other bracket to the other side.
3. Make sure the brackets are properly attached to the “A12R/U-FS & SS,
A16R/U-FS & SS and A24R/U-FS & SS”.
Enter ESC
Power P/S Fail Access