User Manual

Using the LCD Console
3-8
3.3.5 System Settings
In the System Setup menu, users are allowed to change the password
settings, save or restore the configurations to NVRAM, reboot and power
off the system. See the following table for details of each option.
Use the UP and DOWN buttons to scroll through the items and options.
Press the ENT button to select. To cancel the selection and return to the
previous level, press the ESC button.
3.3.6 System Information
The System Info menu provides the following information. Use the UP and
DOWN buttons to scroll through each of them. Users are allowed to
modify the model name of the system and controller.
* Line 1 shows the controller A information, and Line 2 shows the controller B
information.
Password Passwd ENABLE: YES (default) / NO
Enable or disable the password check when logging in
menu.
Change Passwd
Key in the new password. The maximum length of
password is eight characters. Press and hold the ESC
button to backspace continuously and return to the
previous level.
Save Config Save to NVRAM: NO (default) / YES
Save configurations to NVRAM.
Restart: NO (default) / YES
Reboot the system.
Factory: NO (default) / YES
Restore the factory settings to NVRAM.
Shutdown NO (default) / YES
Power off the system.
Sys. Model Name Display and modify system model name.
Controller Model* Display and modify controller model name.
Boot Code* Display boot code version.
F/W Version* Display firmware version.
RAM* Display system memory size.
BP ID* Display backplane ID number.
IP Address* Display controller IP address