User Manual

Using the CLI Commands
4-20
4.5.2 SAS ports
4.5.3 SCSI ports
Command
hddqueue
Synopsis
hddqueue on/off
Description
Enable or disable the IO queuing of hard disks.
Command
hdddelayaccess
Synopsis
hdddelayaccess [-b] xxsec
Description
Specify the delay time before the controller tries to access
the hard disks after power-on.
Parameters
[-b]: boot-up delay access time
Command
hddverify
Synopsis
hddverify on/off
Description
Enable or disable the write commands for initialization or
rebuilding data on logical disks.
Command
hddlistconf
Synopsis
hddlistconf
Description
List the current hardware configurations of all hard disks.
Command
sasname
Synopsis
sasname sasx name
Description
You can sets the name of a SAS port, sasx, as name. The
default is “sasx”.
Command
saslistcurconf
Synopsis
saslistcurconf sasx/all
Description
Displays the current configurations of a SAS port (sasx) or all
SAS ports (all).
Command
scpname
Synopsis
scpname scpx name
Description
You can sets the name of a SCSI port, scpx, as name. The
default is “scpx”.