User Manual

Using the CLI Commands
4-25
4.5.8 Uninterruptible power supply
Command
enclist conf
Synopsis
enclistconf
Description
List enclosure configurations.
Command
encidentify
Synopsis
encidentify on/off encx
Description
Enable or disable identifying the enclosure with a visual
indication. This command is applicable only when enclosure
visual indication hardware is available.
Command
encfwupdate
Synopsis
enfwupdate encx firmware.bin
Description
Update the firmware of the controller in an external
enclosure with the specified firmware file.
Command
upscontrol
Synopsis
upscontrol on/off
Description
Enable or disable UPS support.
Command
upslist
Synopsis
upslist
Description
List UPS information.
Command
upsconfig
Synopsis
upsconfig [-d YY/MM/DD] [-l xxsec] [-r xx%] [-s xxsec]
[-b xxsec]
Description
Set UPS configurations. At least one option should be
assigned.
Parameters
[-d YYYY/MM/DD]: date of last battery replacement
[-l xxsec]: low battery runtime threshold
[-r xx%]: minimum battery charge capacity before restart
[-s xxsec]: UPS delay power off in seconds
[-b xxsec]: UPS delay power on in seconds