User Manual

Using the CLI Commands
4-27
Command
isnsconfig
Synopsis
isnsconfig add/remove server[:port]
Description
Configure the iSNS servers for iSCSI target automated
discovery by iSCSI initiators. At most two iSNS servers can be
added. The first added one will be the primary server and
the latter one is the secondary server. If iSNS server is
configured, the controller shall automatically register iSCSI
target information.
Command
isnslist
Synopsis
isnslist
Description
isnslist displays information of iSNS servers.
Command
sesslist
Synopsis
sesslist istx/all
Description
Display sessions to one or all iSCSI targets including the
following information.
Command
iscsiport
Synopsis
iscsiport ispx method [-a ip_addr][-s net_mask][-ggw_addr]
[-m MTU_size]
Description
Set the IP address of an iSCSI port, ispx.
Command
iscsiportlist
Synopsis
iscsiportlist ispx
Description
Display the IP address settings and MAC of an iSCSI port.
Command
iscsi targport
Synopsis
iscsi targport [listening_port]
Description
Set iSCSI target listening port.
Command
iscsiaggregport
Synopsis
iscsiaggregport create method [-a ip_addr] [-s net_mask] [-g
gw_addr][-m MTU_size][-p all/x,y,...] iscsiaggregport delete
iscsiaggregport update method [-a ip_addr] [-s net_mask] [-
g gw_addr] [-m MTU_size]
Description
Create, deletes or updates an iSCSI aggregation target port
with IP address and other network related setting.