User Manual

Appendix
D-29
• SMART disk self tests
Event ID
0x081c
Type
DISK
Severity
WARNING
Parameters
Chip ID,
Controller ID
Message
Reset disk i/f chip x in controller y
Description
The controller y resets chip x that failed to execute commands
properly. This could be a transient error due to unstable channel,
heavy traffic, or malfunctioning hard disks. The controller will
resume normal operations of the chip after reset; however, this
could result in performance drop of the disks attached to the disk
ports of this chip.
Advice
If this event occurs often, check the disk connectivity, check
power supply to disks, or replace with a new disk.
Event ID
0x081d
Type
DISK
Severity
FATAL
Parameters
Chip ID,
Controller ID
Message
Disk i/f chip x in controller y failed
Description
The controller y cannot execute commands properly on chip x
after all appropriate recovery procedures were conducted. This
could be the result of unstable power supply to the system. All
disks controlled by the chip will fail.
Advice
Check power supply, replace with a new controller, or contact
local sales or support office.
Event ID
0x081f
Type
DISK
Severity
ERROR
Parameters
Disk Chan-
nel ID, Con-
troller ID,
Register
value
Message
Disk channel x in controller y PCI Error cause register: z
Description
The controller y has detected error in the disk channel.
Advice
Check if the power supply is stable. Contact local sales or sup-
port office.
Event ID
0x0807
Type
DISK
Severity
INFO
Parameters
Disk ID
Message
SHT DST on HDDx started
Description
hddx started SMART short device self test routine.
Advice
None