User Manual

Appendix
D-54
Event ID
0x2809
Type
ENCLOSURE
Severity
NOTICE
Parameters
Voltage
Message
+12V voltage source in backplane back to normal (z V)
+12V voltage source in controller back to normal (z V)
Description
+12V voltage source in backplane or controller returned to nor-
mal range, right now is zV.
Advice
If the voltage is very unstable, contact local sales or support
office.
Event ID
0x280a
Type
ENCLOSURE
Severity
WARNING
Parameters
Voltage
Message
Abnormal +3.3V voltage source in backplane (z V)
Abnormal +3.3V voltage source in controller (z V)
Description
The current voltage of the +3.3V voltage source in backplane or
controller was out of normal range, right now is zV.
Advice
Check the power supply system, or contact local sales or support
office.
Event ID
0x280b
Type
ENCLOSURE
Severity
WARNING
Parameters
Voltage
Message
Abnormal +5V voltage source in backplane (z V)
Abnormal +5V voltage source in controller (z V)
Description
The current voltage of the +5V voltage source in backplane or
controller was out of normal range, right now is zV.
Advice
Check the power supply system, or contact local sales or support
office.
Event ID
0x280c
Type
ENCLOSURE
Severity
WARNING
Parameters
Voltage
Message
Abnormal +12V voltage source in backplane (z V)
Abnormal +12V voltage source in controller (z V)
Description
The current voltage of the +12V voltage source in backplane or
controller was out of normal range, right now is zV.
Advice
Check the power supply system, or contact local sales or support
office.