User Manual

Appendix
D-62
• Security control
Event ID
0x2431
Type
SYSTEM
Severity
FATAL
Parameters
Controller ID
Message
NVRAM mapping table on controller x checksum error
Description
The checksum stored on NVRAM cannot match the contents on
the NVRAM. This could happen during the controller is not prop-
erly shutdown. System will restore default the default mapping
table automatically
Advice
Start to monitor more carefully the status of the NVRAM.
Event ID
0x240d
Type
SYSTEM
Severity
INFO
Parameters
Message
Admin login
Description
Administrator login to the controller.
Advice
None
Event ID
0x2410
Type
SYSTEM
Severity
INFO
Parameters
Message
Admin login failed
Description
Administrator failed to login to the controller.
Advice
Check if there is any unauthorized trial access to the controller or
there are multiple administrator logins.
Event ID
0x2427
Type
SYSTEM
Severity
INFO
Parameters
Message
User login
Description
User login to the controller.
Advice
None
Event ID
0x2428
Type
SYSTEM
Severity
INFO
Parameters
Message
User login failed
Description
User failed to login to the controller.
Advice
Check if there is any unauthorized trial access to the controller.