User Manual

Using the RAID GUI
2-4
Move the cursor to a system, and the following system information will
appear: IP address, System name, Model name, Firmware version, and
Status. Click on a system to open its GUI, and you can login to view the
complete system information.
If there are too many on-line systems displayed in the viewer at one time,
you can use the arrow buttons to scroll up and down. Click the button
to refresh the viewer.
Move your cursor away from the viewer, and it disappears.
Note
1. The multiple system viewer supports up to 256 on-line systems.
2. Only systems in the same subnet mask will appear in the multiple
system viewer.
Figure 2-5 Opening the multiple system viewer