User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
Appendices
User Guide Page 6-6
A drive being selected for expansion / migration / rebuilding
A transition drive state during the array 1, 2, 3, 4, migration
A transition drive state during the array 1, 2, 3, 4, expansion
A transition drive state during the array 1, 2, 3, 4, auto-rebuild
RAID Levels
Appendix C: Customer Service and Support
C.1 System Log
When you contact us for technical support, our support staff might ask for your system log file for
troubleshooting purpose.
Go to the ExaSAN switch GUI, select the “Event Management” icon. Follow instructions there to
download the log file.
C.2 Contact Us
For customer services and technical support, locate an Accusys office near you from the link below:
http://www.accusys.com.tw/about/contact.htm
Or, you may email us at support@accusys.com.tw
C.3 Our Website
Please visit our websites frequently for the most up-to-date product and support information.
All countries:
www.accusys.com.tw
Korea:
http://accusys.co.kr