User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
3. Installation
User Guide Page 3-9
3.3.4 Installing the driver and RAIDGuard X
The RAIDGuard X GUI can be downloaded from the Accusys website. Go to the website support page
(
http://www.accusys.com.tw/support/download_new.htm) for available downloads. If you need more info
or tech support, please contact your system integrator of ExaSAN product or Accusys FAE Dept. (see
Appendix C “Customer Service and Technical Support” for more information)
3.3.4.1 Installing RAIDGuard X on MAC and Windows
RAIDGuard X Installation
1. Insert the CD-ROM into the CD-ROM drive of the MAC or PC.
2. For Macs, execute “CD-ROM/MAC Installation/Vx.x/6xxxx_IP_MAC_x_x_x.mpkg".
For PCs, execute “CD-ROM/Windows installation/GUI/x.x/6xxx_IP_Win_x.x.exe”.
Note
If you cannot find the installation DVD or you want to install the latest version of
software, please go to Accusys official web site.
(http://www.accusys.com.tw/support/download_new.htm)
3. Follow the onscreen instructions. Sample screens shown below are from a MAC installation.
Figure 23: GUI welcome page
4. Accept the License Agreement and click Continue.