A-CB440 Postal Scale Instruction Manual 1. Specification 11 Capacity dan ip 1.2 Graduation: 0.050 b/1 1.3 Overload: 443 11h 1.4 Five numbers LCD display 15iblozlbKg 1.8 Alta power off 90s (when the slices rus on AG adapter the scale will not tum off automatically) 1.7 Low battery indication 1.8 Operates on'4 AAA 1.5V battery or 6 AC adapter, 2.
32 Auto a one The scale will tum off automatically in 90s i there is no operation. it will ‘save the measuring unit when the scale fums off, When vou tum on the scale next time, the default unit will be the same as last used unit. (when the scales runs on AC adapter, the scale will not tum off automatically) 3.3 Overload indication: H overload, the LED will show "En it will auto power off if continue overload for 10s.
Won) Ub (Kad 4.4 Weighing: Put the elms In the middle of scale platform , the LOD will show the aes alight of the goods oF Ol 9.0. (20Lb Daz) 2000th) (EKG) 4S Lock the weight During weighing, press "HOLD {6 lock the LCD Number the LCD will show "HILL" as below picture; Press "HOLD" again fo release the number or auto release after BO seconds, and the sign of “HOLD will disappear. " BOBBED GOLD splay) 48 TARE RESET. Shorty press OFT 16 TARE or RESET the scale if beaded. Bh {hot zm before wellington.
5 Calibration 2.1 Tum on the scale, then press both "TARE" and "HOLE for three seconds until the LED shows. (Boot hereon) When the LCD shows “5.00Ky’, Press “MODE” to switch the calibration unt and Press "HOLD/TARE” to select the calibration weight between { Note: The weight wil increase by 5Kg/10LE each time.) # press "MODE" to select the weight of 20kg and put theology weight when LCD shows "20K. LCD will show the picture "PASS then remit the weighing stile. TT Press “HOLD put. 20kg weight (6.00 Ke) {20.
