User's Manual

21
 Use number: Save or call the numbers in the received message.
Outbox: Read the sent, saved and unsent multimedia messages, and perform operations such as read, details, forward,
delete, delete all and use number.
Drafts: Save the edited multimedia message and perform operations such as read, edit, delete, delete all, use details and
send details.
Details: View the details of the message;
◆ Use number
Templates: The mobile phone has five preset multimedia messages. You can perform operations such as read, details, and
create new message with templates; you can also customize the templates.
MMS settings: You can set the MMS parameters in this menu.
Editing setting:
 Editing mode: Two editing modes are available: unlimited and limited.
 Image zooming: 160*120, 320*240 and OFF.
 Auto signature: After editing the signature, show/hide the name of the sender.
 Edit: Edit the auto signature.
Sending settings:
 Validity – Set the saving and sending time of short messages in service center, including one hour, six hours, 12
hours, one day, one week and maximum.
 Sending report – Enable/disable sending report.
 Reading report - Enable/disable reading report.
 Priority – Select the priority of sending MMS: Common, High, and Low.。

Page time – Set the time interval of reading multi-page multimedia message. (Default: 5sec)
(Maximum: 60sec)
 Sending time: Real time, one hour, 12 hours or 24 hours.
Receiving setting:
Filter: Anonymous sender – Allow/Return
AD message - allow/return
Server setting:
CHINA MOBILE MMS
 Activate setting
 Edit setting
 Change option name – Set the name
 Homepage - Edit the web address of multimedia message (e.g.: China Mobile: http://mmsc.monternet.com)
 Network account – China Mobile GPRS
 Connection type – Continuous, intermittent and HTTP.
 User name – Edit user name.
 Password: Set the password.
Other settings of MMS are same to China Mobile MMS.
Memory status: View the usage rate, occupied space and memory of the mobile phone.
Chat
Two chat rooms are available. You can set My nickname and recipient, and then select Start chatting.
Voice mail
SIM1 voicemail
Voicemail is a network service. You need to subscribe for this service first. Please contact your network operator for more
information.

Connect to voice: Call the voice mail number saved in the list. If you have two telephone numbers, you can customize the
voice mail number for each number respectively.
 Edit: Edit the voice mail number, and press OK to save the number.
Note: In standby state, input the voicemail number and press and hold Number key 1 to call the voicemail. Set SIM1
voicemail and make the call with SIM1
SIM2 voicemail
Voicemail is a network service. You need to subscribe for this service first. Please contact your network operator for more
information.

Connect to voice: Call the voice mail number saved in the list. If you have two telephone numbers, you can customize the
voice mail number for each number respectively.
 Edit: Edit or delete the voice mail number, and press OK to save the number.
Note: In standby state, input the voicemail number and press and hold Number key 1 to call the voicemail. Set SIM2 voicemail
and make the call with SIM2.
Cell broadcast
SIM1 cell broadcast
Cell broadcast is the service that the network operator sends messages such as weather report and traffic to the GSM
subscribers in specified area.
[Receiving mode]: Enable/disable message receiving.
[Read message]: If the cell broadcast is enabled, you can read the received messages.
[Language]: Set the language of received message.
[Channel setting]: Select, add, edit or delete the channel.