User's Manual

-25-
conversation.
u Call divert: this network function enables you to forward incoming calls to another number you
have previously specified.
u Call barring: The call barring function enables you to bar calls as needed. When setting this
function, you need to use a network barring code, which can be obtained from the network
operator. If the code is wrong, an error message will be prompted on the screen. After selecting
a call barring option, continue to select Activate or Deactivate. The mobile phone will prompt you
to input the call barring code and then contact the network. A moment later, the network will
make a response and send the operation results to the mobile phone.
u Line switching: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network
operator.
Advanced settings
u Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the
mobile phone will automatically redial the number a moment later if the called party does not
reply. The number of auto redial times can be set to a maximum of 10. In the auto redial period,
you cannot dial other numbers. To end the auto redial process, press the End key.
Note: This function requires support from the network operator to which the SIM card is registered.
u Call time reminder: To set single or circle tone in a call to make you know the time.
u Answer mode: Set answer mode as per your need.