Cleaning Instructions

M2SmartSE_Set_Brief Overview_V1.11_en_fr 22 / 63
Storage
temperature
-20 °C to 60 °C/-4 °F to 140 °F
Device dimensions
138 x 200 x 82 mm (L x W x H)
Weight
557 g
Power supply
15 VDC, 36 W
Display
2 status LEDs
Interfaces
USB, Ethernet, DC plug
9 M2Module
9.1 Intended Use
The modules of the Mobile Handheld Computer serve as accessories for the M2Smart
®
SE. The included
components are intended exclusively for use with the Mobile Handheld Computer.
9.2 Warning and Safety Notices
Please read the following warning and safety notices. They are for your safety and to ensure that the various
modules are ready to use.
CAUTION
Only ACD original power supplies may be used for operation of the
modules! The use of components that have not been approved can
cause the destruction of the modules or the main device.
CAUTION
Do not set the modules near heat sources (heater blowers, etc.)
and never subject them to direct solar radiation, excess quantities
of dust or shocks. Make sure that there is no stumbling hazard due
to connection cable or power supplies.
CAUTION
The modules may not be used in areas subject to explosion.
CAUTION
Before using the modules, any connection cables must be
checked for damage. Damaged parts must be replaced. For this,
please contact ACD Elektronik GmbH.
CAUTION
Before use, the contacts of the modules and the contacts of any
plugs present must be checked for dirt and cleaned if necessary.
CAUTION
Unintended use of the interfaces is forbidden.
CAUTION
To prevent overheating, the modules may not be covered during
operation.