Cleaning Instructions

M2SmartSE_Set_Brief Overview_V1.11_en_fr 29 / 63
Turn off the device before starting any cleaning or maintenance
process!
Make sure that the laser beam is switched off by checking the
laser beam exit!
Laser beam exit
10.1 Display
To clean the display, always switch the Mobile Handheld Computer off since the display reacts to being
touched and therefore the active program can be compromised or destroyed. Do not put a lot of pressure on
the display.
10.2 Window for scanner, camera, and camera lighting
In case of abnormalities during scanning, switch the Mobile Handheld Computer off and clean the scanner
pane with a soft-dry cloth. The scanner pane is very transparent and hardly visible with the naked eye.
Shape the cloth accordingly, so that it can be moved slightly back and forth in the scanner shaft. Do not put a
lot of pressure on the glass.
10.3 Charging and communication contacts
If there are charging or communication problems, clean the charging and communication contacts with a
soft, damp cloth.
CAUTION
When cleaning the charging and communication contacts of the
docking station, disconnect the device from the power!
10.4 Keyboard/Keys
To clean the keyboard/keys, always switch the Mobile Handheld Computer off since the keyboard/keys react
to being touched and therefore the active program can be compromised or destroyed. Do not put a lot of
pressure on the keyboard/keys.
11 Open Source Software
This product includes software components that are licensed by rights holders as free software or open
source software under the GNU General Public License. If necessary, you can request the source code for
these software components from ACD Elektronik GmbH if you make a request through ACD Elektronik
GmbH to ACD support within three years after sale of the product. Any costs for work incurred will be
communicated to you on request.
Contact:
ACD Elektronik GmbH
ACD Support