Cleaning Instructions

M2SmartSE_Set_Brief Overview_V1.11_en_fr 8 / 63
CAUTION
Before use, the Mobile Handheld Computer, battery, docking
station, power supply, and any connection cables must be
checked for damage. Damaged parts must be replaced. For this,
please contact ACD Elektronik GmbH.
CAUTION
If metal chips or other conductive parts get into the battery
compartment, switch off the Mobile Handheld Computer
immediately and clean it.
CAUTION
Unintended use of the interfaces is forbidden.
CAUTION
To prevent overheating, the Mobile Handheld Computer, battery,
docking station, and the power supply may not be covered while
they are in operation.
CAUTION
The device may only be opened by trained specialized personnel.
Opening the battery is prohibited.
CAUTION
Excessive sound pressure from earphones, headphones and
headsets can cause hearing loss.

NOTE
This is a Class A device (EN55032). This device can cause radio
interference in residential areas.
In this case, the operator can be asked to take appropriate actions.
CAUTION
If the rechargeable battery is damaged during installation, please
replace it appropriately right away.
CAUTION
The device has the following radio systems:
WLAN, BT-compatible short-range radio, RFID
Frequency bands:
 WLAN
2.412 GHz – 2.472 GHz
5.15 GHz – 5.35 GHz
5.47 GHz – 5.725 GHz
 BT-compatible short-range radio
2.402 GHz – 2.480 GHz
 RFID
13,56 MHz
Max. permissible transmission power on the frequency band:
 WLAN 2.4 GHz band max. 100 mW
 WLAN 5 GHz band max. 200 mW
 BT-compatible short-range radio max. 100 mW
 Max. 42 dBµA/m in 10 m distance (mag. Field strength)