Users Manual

M2Smart
®
SE_Set_Brief Overview_V1.02_en_es_fr 10 / 32
4.2.2 Handling
After the M2UHF-RFID Shortrange attachable module has been plugged into the main device on the upper
plug-slide mechanism, it can be used for reading UHF-RFID tags.
To do this, start a software application to initialize the module. Then the read process can be carried out with
the software application.
Figure 13: M2UHF-RFID Shortrange Antenna and Radiation
The red box represents where the antenna is palced and the red lines indicate the radiation of HF signal.