Users Manual

M2Smart
®
SE_Set_Brief Overview_V1.02_en_es_fr 15 / 32
Commissioning and Operation of Accessories
4.3 Docking station DS2Smart
®
Charging and transmission box, DS2Smart
®
Charging box and DS2Smart
®
Developer box
4.3.1 Security Advices
ATTENTION
Only ACD original power supplies and rechargeable batteries
approved by ACD may be used for the operation of the Mobile
Handheld Computer and docking station! The use of components
that have not been approved can cause the destruction of the
backhand scanner or docking station. Do not use the ACD-
approved components with a third-party device.
ATTENTION
Before use, the Mobile Handheld Computer incl. battery, docking
station, power supply, and any connection cables should be
checked for damage. Damaged parts should be replaced. Please
contact ACD Elektronik GmbH to do this.
ATTENTION
For indoor use only.
ATTENTION
To prevent overheating, the Mobile Handheld Computer incl.
battery, docking station, and the power supply should not be
covered while they are in operation.
ATTENTION
Never position the Mobile Handheld Computer incl. battery in close
proximity to heat sources (heating fans or similar equipment) and
never expose it to direct sunlight, excessive dust sources or
shocks.
4.3.2 Inserting the Mobil Handheld Computer in and removing it from the docking station
To insert the Mobile Handheld Computer in the docking station, put it in vertically downward. To remove the
Mobile Handheld Computer from the docking station, pull it vertically upward out of the docking station.
Figure 16: Inserting Mobile Handheld Computer in and removing it from the docking station