Users Manual

M2Smart
®
SE_Set_Brief Overview_V1.02_en_es_fr 19 / 32
4.4.2 Inserting the replacement rechargeable battery in and removing it from the docking
station
To insert the replacement rechargeable battery in the device, tip it diagonally downward and place it in the
rechargeable battery compartment. Insert the rechargeable battery so that the contacts are aligned with the
contacts of the docking station. Press the rechargeable battery into the rechargeable battery compartment
until it snaps in audibly.
Figure 20: Inserting replacement rechargeable battery in the docking station
To remove the replacement rechargeable battery from the docking station, first open the lock by pressing
toward the surface of the rechargeable battery. Remove the rechargeable battery upward.
Figure 21: Removing replacement rechargeable battery in the docking station
ATTENTION
Place the docking station correctly on a smooth and clean
underground, which is not exposed to direct sunlight.
ATTENTION
The charging and communication contacts are very sensitive! The
Mobile Handheld Computer and the replacement rechargeable
battery may only be inserted in and removed from the docking
station as described above. Do not touch the contact with your
fingers or with objects such as pens, screwdrivers, etc.
ATTENTION
Do not leave the battery in the charger or docking station for an
unnecessarily long time.