Users Manual

M2Smart
®
SE_Set_Brief Overview_V1.02_en_es_fr 21 / 32
4.5 M2Grip5
A handle is available as an accessory for the M2Smart
®
SE. It can be attached to the M2Smart
®
SE without
tools.
Figure 23: M2Grip5
The upper and lower slide mechanisms remain untouched and can therefore still be used for different
M2Modules. It is still possible to charge the M2Smart
®
SE with M2Grip5 in the DS2Smart
®
.
Please note that the M2Grip5 is suitable for the M2Smart
®
SE without scanner and for the M2Smart
®
SE with
2D shortrange scanner (SE4770).
4.5.1 Security Advices
ATTENTION
Unintended use of the M2Grifp5 should be avoided.
4.5.2 Attaching M2Grip5 to the M2Smart
®
SE
To attach the M2Grip5 to the M2Smart
®
SE, the first step is to remove the retaining strap.
After removing the retaining strap, the M2Grip5 can be attached to the M2Smart
®
SE.
To do this, guide the nose of the M2Grip5 to the upper retaining strap attachment and hook it in there. Then
slide the side sections of the M2Grip5 onto the device.
Figure 24: Attaching M2Grip5 to M2Smart
®
SE
The scanner button is now mechanically contacted and can be triggered by the scanner button in the handle.