Users Manual

M2Smart
®
SE_Set_Brief Overview_V1.02_en_es_fr 23 / 32
4.6 M2 logistics protective caps
M2 logistics protective caps are another accessory for the M2Smart
®
SE. Their purpose is to increase fall
protection. M2 logistics protective caps are designed for the upper and lower blind cap.
Figure 27: M2 logistics protective caps
To charge the M2Smart
®
SE in the DS2Smart
®
, the M2 logistics protective caps must be removed.
4.6.1 Security Advices
ATTENTION
Unintended use of the M2Grifp5 should be avoided.
4.6.2 Attaching M2 logistics protective caps to the M2Smart
®
SE
To attach the upper and lower M2 logistics protective cap to the M2Smart
®
SE, place it over the
corresponding blind cap.
The upper logistics protective cap is marked by the ACD logo and also has a recess for the scanner.
Figure 28: Attaching the upper logistics protective cap
The lower logistics protective cap is identified by the recess for the retaining strap and the charging contacts.
First loosen the retaining strap and then attach the lower logistics protective cap. You can then reattach the
retaining strap.