ARI2061-3 / ARI2061-3B IMPACT WRENCH PRODUCT INFORMATION MANUAL Manuel informations du produit Manual información del producto English Français Español THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. CE MANUEL CONTIENT DES INFORMATIONS IMPORTANTE CONCERNANT LA SECURITE, L'OPERATION, LA MAINTENANCE ET LE STOCKAGE DE CE PRODUIT.
1English1 THANKS FOR CHOOSING THIS PRODUCT ACDelco provides you with products at an affordable price, and we would like you to be fully satisfied with this product and our technical support. If any help or advice is needed, please kindly contact us. INTENDED USE This tool is intended for personal use only. This Impact Wrench is designed to remove and install threaded fasteners. GENERAL SAFETY RULES READ AND UNDERSTAND ALL INSTRUCTIONS.
1English1 WARNING LABEL IDENTIFICATION Read Manuals Before Operating Product. Wear Eye Protection. Wear Hearing Protection. Wear Dust Mask. Wear Respiratory Protection. Power tools can vibrate in use. Do not carry the tool by the cord. Keep body stance balanced and firm. Do not overreach when operating this tool. IMPORTANT SAFETY RULES DANGER When using power tools, always prevent exposure and breathing of harmful dust and particles.
1English1 WORK AREA WARNING Keep work area clean and well lit. Cluttered and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
1English1 TOOL USE AND CARE CAUTION Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired.
1English1 BATTERY TOOL USE AND CARE CAUTION Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs.
1English1 SPECIFIC SAFETY RULES AND SYMBOLS CAUTION Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with ’live’ wire will also make exposed metal parts of the tool ’live’ and shock the operator. Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
1English1 FUNCTIONAL DESCRIPTION 1 2 4 3 5 6 7 8 9 CONTROLS AND COMPONENTS: 1. 3. 5. 7. 9. Aluminum Gearbox Housing Built-in LED light Variable Speed Switch Battery indicator Battery Pack 2. 4. 6. 8.
1English1 SPECIFICATIONS Model Number Voltage Drive Max. Tightening Torque Max. Reverse Torque Max. Breakaway Torque No Load Speed Impacts per Minute Tool Weight ARI2061-3B ARI2061-3 18 Vdc 3/8" Square 190 ft-lbs (260 Nm) 300 ft-lbs (400 Nm) 400 ft-lbs (540 Nm) 0-2000 RPM (/min) 0-3000 IPM 3.63 lbs (1.65 kg) 4.24 lbs (1.
1English1 OPERATION NOTE Always check the direction of the rotation before use. 1. After continuous use, allow the impact wrench to sit idle for 15 minutes before replacing the battery. The temperature of the motor, switch, etc., will rise if the work is started again immediately after the battery has been changed, eventually resulting in burned-out. 2. Place the point of the bolt in the socket. Keep the tool pointed straight at the bolt. 3.
1English1 MAINTENANCE WARNING Remove the battery pack from this tool before cleaning solutions. NOTE This tool is lubricated before it leaves the factory. This lubrication should last for the life of the tool. No further lubrication is required. CLEANING With the motor running, blow dirt and dust out of all air vents with dry air at least once a week. Wear safety glasses when performing this. Exterior plastic parts may be cleaned a damp cloth and mild detergent.
1Français1 MERCI D'AVOIR CHOISI CE PRODUIT ACDelco offre des produits à des prix abordables et nous espérons que ce produit et notre support technique vous satisferont pleinement. Si vous avez besoin d'assistance, n'hésitez pas à nous contacter. UTILISATION PRÉVUE Cet outil est uniquement prévu pour une utilisation personnelle. Cette clé à chocs est conçue pour monter et démonter des éléments de fixation filetés. RÈGLES GÉNÉRALES DE SÉCURITÉ LISEZ ET COMPRENEZ TOUTES LES INSTRUCTIONS.
1Français1 IDENTIFICATION D'ÉTIQUETTE D'AVERTISSEMENT Lisez les manuels avant d'utiliser le produit. Port de protection oculaire. Port d'une protection auditive. Port d'un masque anti-poussière Port de protection respiratoire. Les outils peuvent vibrer lorsqu'ils sont en marche. Ne transportez pas l'outil en le tenant par le cordon. Positionnez votre corps de manière bien équilibrée et stable. Ne jouez pas au plus malin lorsque vous utilisez cet outil.
1Français1 ESPACE DE TRAVAIL AVERTISSEMENT Gardez votre espace de travail propre et bien éclairé. Le désordre et le manque d'éclairage sont des conditions propices aux accidents. N'utilisez pas les outils électriques dans des atmosphères explosives, comme en présence de liquides inflammables, gaz ou poussière. Les outils électriques génèrent des étincelles risquant d'enflammer la poussière ou la fumée. Gardez les enfants et les spectateurs hors d'atteinte pendant le fonctionnement d'un outil électrique.
1Français1 SÉCURITÉ PERSONNELLE AVERTISSEMENT Restez attentif, faites attention à ce que vous faites et utilisez votre bon sens lorsque vous utilisez l'outil électrique. N'utilisez pas un outil électrique quand vous êtes fatigué ou sous l'influences de drogue, d'alcool ou de médicaments. Un moment d'inattention pendant l'utilisation de l'outil électrique peut engendrer des blessures corporelles graves. Utilisez des équipements de sécurité. Portez toujours des protections pour vos yeux.
1Français1 UTILISATION ET ENTRETIEN D'OUTIL ATTENTION Utilisez des clames ou d'autres méthodes pratiques pour fixer et supporter la pièce de fabrication sur une plateforme stable. Le maintien de la pièce avec votre main ou contre votre corps n'est pas stable et risque de vous faire perdre le contrôle. Ne forcez pas l'outil. Utilisez l'outil adapté à l'application. L'outil adapté donnera des meilleurs résultats et permettra d'effectuer la tâche en toute sécurité.
1Français1 UTILISATION ET ENTRETIEN D'UNE BATTERIE ATTENTION Vérifiez que l'interrupteur est sur la position d'arrêt avant d'installer la batterie. L'installation d'une batterie dans un outil allumé risque de causer des accidents. Rechargez la batterie uniquement avec le chargeur spécifié par le fabricant. Un chargeur adapté à un type de batterie peut créer un risque d'incendie s'il est utilisé avec une autre batterie. Utilisez les outils électriques uniquement avec les batteries spécifiées.
1Français1 RÈGLES ET SYMBOLES SPÉCIFIQUES DE SÉCURITÉ ATTENTION Maintenez l'outil par les surfaces antidérapantes isolantes quand vous effectuez une tâche ou l'outil de coupe risque d'entrer en contact avec des câbles électriques cachés. Le contact avec des câbles sous tension mettra les pièces métalliques exposées de l'outil également sous tension et électrocutera l'operateur. Soyez averti que cet outil est toujours opérationnel car il n'a pas besoin d'être branché à une prise de courant.
1Français1 DESCRIPTION FONCTIONNELLE 1 2 4 3 5 6 7 8 9 COMMANDES ET COMPOSANTS: 1. Coque de la boîte de vitesse en aluminium 2. Carré d'entraînement 3. Lampe à DEL intégrée 4. Bouton de commande marche avant / arrière 5. Interrupteur à vitesse variable 6. Poignée anti-dérapante 7. Indicateur de batterie 8. Bouton de libération de la batterie 9.
1Français1 SPÉCIFICATIONS Numéro de modèle Tension Entraînement Couple de serrage max. Couple inverse max. Couple de rupture max.
1Français1 OPÉRATION REMARQUE Vérifiez toujours le sens de rotation avant l'utilisation. 1. Après une utilisation continue, laissez la clé à chocs au repos pendant 15 minutes avant de remplacer la batterie. La température du moteur, de l'interrupteur, etc., augmentera si vous travaillez immédiatement après le remplacement de la batterie, qui finalement s'épuisera. 2. Placez le point du boulon dans la douille. Gardez l'outil pointé directement sur le boulon. 3.
1Français1 MAINTENANCE AVERTISSEMENT Retirez la batterie de cet outil avant de nettoyer. REMARQUE Cet outil est lubrifié avant de quitter l'usine. Cette lubrification dure toute la durée de vie de l'outil. Aucun lubrification supplémentaire n'est nécessaire. NETTOYAGE Avec le moteur allumé, soufflez pour extraire la saleté et la poussière des orifices d'aération avec de l'air sec au moins une fois par semaine. Portez des lunettes de sécurité quand vous faites ce nettoyage.
1Español1 GRACIAS POR ELEGIR ESTE PRODUCTO ACDelco le ofrece productos a un precio asequible y nos gustaría que quedara completamente satisfecho con este producto y nuestro soporte técnico. Si necesita ayuda o consejo, contacte con nosotros. USO INTENCIONADO Esta herramienta es sólo para uso personal. Esta llave de impacto ha sido diseñada para quitar e instalar tornillos de rosca. NORMAS DE SEGURIDAD GENERAL LEA Y COMPRENDA TODAS LAS INSTRUCCIONES.
1Español1 IDENTIFICACION DE LA ETIQUETA DE ADVERTENCIA Lea los manuales antes de utilizar el producto. Lleve protección para los ojos. Lleve protección para los oídos. Lleve máscara antipolvo. Lleve protección de respiración. Las herramientas con alimentación pueden vibrar al usarlas. No transporte la herramienta por el cable. Mantenga el cuerpo firme y equilibrado. No se sobreesfuerce al utilizar esta herramienta.
1Español1 ÁREA DE TRABAJO ADVERTENCIA Mantenga el área de trabajo limpia y bien iluminada. Las áreas atestadas y oscuras invitan a los accidentes. No utilice herramientas de potencia en atmósferas explosivas, como en presencia de líquidos inflamables, gases o polvo. Las herramientas de potencia crean chispas que pueden prender el polvo o el humo. Mantenga a los niños y curiosos lejos de una herramienta de potencia. Las distracciones pueden provocar que pierda el control de la máquina.
1Español1 SEGURIDAD PERSONAL ADVERTENCIA Manténgase atento, mire lo que está haciendo y utilice el sentido común cuando trabaje con una herramienta de potencia. No utilice una herramienta de potencia si está cansado o bajo la influencia de drogas, alcohol o medicación. Un momento de distracción durante la utilización de herramientas de potencia puede resultar en graves lesiones personales. Utilice equipo de seguridad. Lleve siempre protección en los ojos.
1Español1 USO Y CUIDADOS DE LA HERRAMIENTA PRECAUCIÓN Utilice abrazaderas u otros medios para asegurar y apoyar la pieza de trabajo en una plataforma segura. Si aguanta la pieza de trabajo con la mano contra su cuerpo, podría desestabilizarse y provocar la pérdida del control. No fuerce la herramienta. Utilice la herramienta correcta para su aplicación. La herramienta correcta realizará el trabajo mejor y de forma más segura si se utiliza con las especificaciones designadas.
1Español1 USO Y CUIDADOS DE LA BATERÍA DE LA HERRAMIENTA PRECAUCIÓN Asegúrese de que el interruptor esté apagado antes de insertar la batería. Si inserta la batería en herramientas de potencia con el interruptor encendido activado, podría tener accidentes. Recargar sólo con el cargador especificado por el fabricante. Un cargador apropiado para un tipo de batería puede suponer un riesgo si se utiliza con otra batería distinta.
1Español1 NORMAS Y SÍMBOLOS DE SEGURIDAD ESPECÍFICOS PRECAUCIÓN Sostenga la herramienta por sus superficies de agarre aisladas cuando realice una operación donde la herramienta de corte pueda contactar con el cableado oculto. El contacto con un cable ’vivo’ también expondrá las partes metálicas de la herramienta en ’vivo’ y descargar en el usuario. Tenga en cuenta que esta herramienta siempre está dispuesta para su funcionamiento, pues no tiene que ser enchufada en un enchufe eléctrico.
1Español1 DESCRIPCIÓN DE LAS FUNCIONES 1 2 4 3 5 6 7 8 9 CONTROLES Y COMPONENTES: 1. Carcasa de engranaje de aluminio 2. Boquilla 3. Luz LED incorporada 4. Botón de control Adelante / Atrás 5. Interruptor de velocidad variable 6. Agarre suave antideslizante 7. Indicador de batería 8. Botón de liberación de la batería 9.
1Español1 ESPECIFICACIONES Número de modelo Voltaje Eje Torque de unión máx. Torque inverso máx. Torque de separación máx.
1Español1 OPERACIÓN NOTA Compruebe siempre la dirección de rotación antes de usar. 1. Tras un uso continuado, deje que la llave de impacto descanse unos 15 minutos antes de cambiar la batería. La temperatura del motor, interruptor, etc, subirá si comienza a trabajar inmediatamente tras cambiar una batería, pudiendo quemarse. 2. Coloque la punta del tornillo en el accesorio. Mantenga la herramienta apuntando derecha hacia el tornillo. 3.
1Español1 MANTENIMIENTO ADVERTENCIA Quite la batería de la herramienta antes de usar disoluciones de limpieza. NOTA Esta herramienta ha sido lubricada antes de salir de fábrica. El lubricante debería durar hasta el final de la vida útil de la herramienta. No necesita más lubricación. LIMPIEZA Con el motor en funcionamiento, sople la suciedad y el polvo de las rejillas de ventilación con aire seco al menos una vez a la semana. Lleve gafas de seguridad cuando realice esto.