User Guide

PUT THE BRAKES ON MYSTERY NOISES

When it comes to your brakes, some noises are normal, while others indicate

there could be a problem requiring service. Here are some common noises and

possible solutions:

• Grinding Grinding is caused by rust buildup on the rotors and is of little

concern. The buildup can usually be removed, or sometimes it disappears

after a few stops. However, if grinding persists, the problem could be more

serious and should be brought to the attention of your service consultant.

• Loud squeals Disc brakes with wear indicators may produce a squeal, indicating

it’s time to change the pads.

• Trace squeaks or squeals Semi-metallic brake linings can emit sound. Rain,

humidity or cold brakes could be the source. If the problem persists, have the

brakes checked.

•

Clicking Sometimes accompanied by a slight pulsing in the brake pedal at

low speeds, it’s most likely the Anti-lock Braking System performing a harmless

self-check.

PREPARING FOR YOUR SERVICE APPOINTMENT

• Write down your vehicle’s symptoms. What noises do you hear? Does the

problem occur when the engine is warm or cold? Be sure to describe the

symptoms and don’t try to diagnose the problem.

• You can expect to receive a thorough explanation of the procedure to be

performed on your vehicle before it happens. Ask for a copy of the signed

estimate so there are no surprises when it’s time to pick up your vehicle.

• If you have any tests conducted during the service, ask for a copy of the

results. Save these documents in your glove compartment or in a special place

at home for easy reference.

• Ask about obtaining a service contract to cover your vehicle in the event of

mechanical failure beyond the manufacturer’s warranty.